Sort by:
Description::
Heavy-Duty Vehicle Antenna Designed for Rural Mobile Coverage
This rugged bullbar antenna is purpose-built for regional and outback use engineered to maximise 4G and 5G connectivity across Australia’s carrier networks. Featuring a wideband PCB radiator housed in a fibreglass radome and mounted via a heavy-duty stainless steel bell spring it withstands harsh terrain without compromising performance. The design delivers strong gain IP67-rated durability and optimal low-band tuning for remote signal retention.
Key Features
- Wideband Coverage: Supports 698–3800 MHz frequencies for full compatibility with Telstra Optus and Vodafone mobile networks.
- Optimised for Remote Bands: Tuned for best performance on Band 28 (700 MHz) Band 26 (850 MHz) and Band 8 (900 MHz) ensuring signal in rural zones.
- Heavy-Duty Bell Spring: Thick stainless steel spring absorbs impact and corrugations protecting the antenna on rough tracks.
- Durable Fibreglass Radome: Reinforced tapered fibreglass whip resists flex and weather exposure while housing the internal PCB radiator.
- IP67-Rated Connector: 4.3–10 removable interface separates mechanical stress from RF path enhancing long-term reliability.
- Ground-Independent Design: Enables flexible mounting across vehicles with consistent signal performance regardless of surface.
- Australian Engineering: Built and tuned specifically for harsh Australian conditions with strong local support.
Made to handle off-road demands this antenna ensures consistent connectivity when travelling beyond coverage blackspots.
Specification:
| Specifications | |
|---|---|
| Frequency Range | 698–960 / 1710–2170 / 2300–2700 / 3400–3800 MHz |
| Nominal Gain | 5.6 dBi |
| Input Power | 10 W max |
| Impedance | 50 Ω |
| VSWR | <1.2:1 typical |
| Polarisation | Vertical |
| Grounding | Ground-independent |
| Connector | SMA Male via 5 m RG58 cable |
| Spring | Heavy-duty stainless steel bell spring |
| Mounting | M14×2P threaded stud and nut |
| Length | 830 mm |
| Weight | 1.9 kg |
| Operating Temperature | –40 to 80 °C |
| Certifications | ISO 9001 |
@20/38
Tech Support:
- Frequency covered - 700/850/900/1800/1900/2100/2600MHz
- Length: 730mm with spring. 600mm without
- Whip Gain: 7dBi
- Cable Length: 4m
- Pack includes: Antenna, Cable, Mount
- Impedance 50ohm
- Polarization: Vertical
- VSWR: <1.5
- Rated Wind Velocity: 200km/h
- Weight: 1.1kg
Package Contents:
This type of antenna is perfect for use when driving in city or rural fringe areas. This high performance magnetic-mount antenna have a thick rubber coating on the magnetic base for a secure hold on flat surfaces as well as to protect the vehicle's paintwork from scratching when used on vehicles.
It can be used with any of our Car Cradles as it comes with FME connector.
Strike 7dBi Magnetic Base Antenna
Features:
Description::The G30 Olympian is a high performance screw mount wide-band cellular antenna for external use on vehicles and outdoor assets worldwide. Omnidirectional high gain and high efficiency across all bands ensures constant reception and transmission. This is vital for today's high data bandwidth applications in video and mobile broadband.
- Wideband 698 to 2700 MHz covering most cellular bands
- Screw-Mount/Permanent Mount
- No Ground Plane Required
- Waterproof IP67 Rated
- First Tier Automotive Approved
- 1 metre RG316 cable with SMA Male straight connector
Durable UV resistant ABS housing is resistant to vandalism and direct attack. At only 48 mm height it complies with the latest EU height restrictions directives for roof-mounted objects. This antenna is mounted on metal and plastic structures and is locked from the inside of the structure by a nut. Adhesive foam at the base provides a watertight seal to the mounting structure. High quality waterproof and corrosion resistant Teflon jacket RG316 is used for the cable. Two of these G30 separated at distance from each other are ideal for the latest LTE MIMO spatial diversity applications. Customized cable length and connectors are available. Taoglas recommend a minimum cable length of 70 mm when used on a ground plane to achieve an efficiency of greater than 40% in the 900 MHz band and greater than 60% in the 1800 MHz band.
@10/22
Description::
The GA.110 magnetic ultra-wideband cellular antenna delivers stable high omni-directional gain and efficiencies across all common 3G 4G and 5G cellular bands from 700 MHz to 3.5 GHz. This high performing antenna can be used for all cellular devices and will not require changing antennas when deploying from country to country or technology to technology like 3G to 4G. Being magnetic mount it is designed to be mounted on a ground plane for optimal performance.
- Strong neodymium magnetic mount
- Flexible black whip
- Wideband covering all major cellular bands from 698 to 3500 MHz
- Ground plane dependent
- 1 metre RG174 cable with SMA Male straight connector
A reliable return loss of <10 dB when mounted on a metal plate ensures it complies with the industry standards set by module makers and networks worldwide. Taoglas recommends using the antenna with 1 m cable length or less and can provide customised connectors and cable lengths upon customer requirements. The strong magnet base is extremely stable and robust using only high quality neodymium magnets for a secure magnetic mount to ensure a high pull force to disengage. Performance on 5G n78 (3500 MHz) is acceptable but weakened due to the antenna's 19% radiation efficiency at this band.
Specification:
| Name | Value |
|---|---|
| Antenna Type | External Antennas Cellular |
| Impedance | 50 |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | 85°C |
| Mounting Style | Magnetic |
| Termination Style | Connector |
| Antenna Connector Type | SMA |
| Cable Type | RG-174 |
| Connector Body Style | Straight |
| Polarity | Linear |
| Frequency Range | 600-4000MHz |
| Connector Polarity | None |
| Cable Length (mm) | 1000 |
| Packaging | PE Bag Carton |
| VSWR | 0 |
| IP Rating | IP44 |
| RoHS | Yes |
| Gain (Max) | 2.5 |
| Length (mm) | 50 |
| Width (mm) | 50 |
| Height (mm) | 298 |
| Weight (g) | 124.5 |
@6/15
Description::
The GSA.8827 Phoenix Ultra-Wideband I-Bar antenna is a robust high efficiency mobile antenna for use with all 3G / 4G / 5G and IoT devices across the world. Its slim-line design allows for convenient installation in automotive vehicles. Its omni-directional gain across all bands ensures constant reception and transmission. The antenna demonstrates some of the best radiation patterns available in the market and is generally considered a best-in-class performer.
GSA8827 has been recently re-certified by Taoglas to operate on several 5G FR1 frequencies. The antenna is an excellent choice for NB-IoT and LTE-M applications such as in industrial metering. This antenna has good performance on the lower cellular bands from 700 to 900 MHz - in particular Band 8 Band 20 and Band 28 LTE.
@7/18
Description::
The Taoglas GSA.8835 is a fully IP67 rated waterproof 4G / 5G external adhesive mount antenna designed for use with all cellular modules worldwide including new bands in the 600 MHz 3.5 GHz and 5 GHz ranges. The "Phoenix II" GSA.8835 has been designed as a fully IP67 waterproof rated enclosure and with extended wideband cellular frequency range coverage of 600 to 6000 MHz the newly designed GSA.8835 is ready for use at all cellular bands across 4G and 5G with compatibility with legacy 3G technologies.
Providing excellent efficiency and gain this low profile (7.9 mm) antenna is ideal in areas where space is at a premium. The GSA.8835 can be mounted on glass or plastic and comes with a strong 3M 1600T adhesive already adhered to the bottom side of the antenna for ease of installation. Phoenix II is a second generation adhesive antenna replacing the popular GSA.8827 antenna. The model covers more frequency bands with similar performance and improved environmental survival. The antenna supports 3.5 GHz n78 5G up to 3600 MHz although peak gain decreases (-1 to -3 dBi) within the 3600 to 3800 MHz range.
@6/17
Description::The MA241 Genesis antenna is an omni-directional fully IP67 waterproof external M2M antenna for use in telematics transportation and remote monitoring applications. It is designed to be mounted directly on glass or plastic in the interior of vehicles. This unique antenna delivers powerful MIMO antenna technology for worldwide 4G LTE bands between 700 and 2600 MHz. It enables designers to use only one antenna that covers all common frequencies for LTE and 4G globally.
- 3G / 4G LTE 2x2 MIMO
- IP67 ingress protected
- Wideband covering all cellular bands from 698 to 2700 MHz
- 3 metre CFD-200 cables with SMA Male straight connectors
- Fully customizable cable lengths and connectors
4G wireless applications demand high speed data uplink and downlink. High efficiency and high gain MIMO antennas are necessary to achieve the required signal to noise ratio and throughput required to solve these challenges. Taoglas also takes care to have high isolation between the two MIMO antennas to prevent self-interference. Low loss cables are used to keep efficiency high over long cable lengths. In contrast smaller MIMO antennas with poorer quality thinner cables will have much reduced efficiency and isolation which would lead to a large drop in system throughput or drops and may indeed not make a system connection at all.
@19/37
Description::The MA251 Sentinel 2-in-1 adhesive mount 4G 2x2 LTE MIMO antenna is an omnidirectional fully IP67 waterproof external IoT/M2M antenna for use in telematics transportation and remote monitoring applications worldwide. It is designed to be mounted directly on glass or plastic in the interior of vehicles. It is the smallest high performance solution in the market 50% smaller than the previous generation with higher efficiency and wider bandwidth to cover emerging LTE bands. Its performance is comparable with much larger permanent roof mount antennas and now offers a convenient and economical alternative in-cabin mounting solution.
- Smallest high performance MIMO antenna
- 4G LTE 2x2 MIMO
- IP67 ingress protected
- Wideband covering all 3G and 4G bands from 698 to 2700 MHz
- 2 metre CFD-200 cables with SMA Male straight connectors
It is mounted via high quality first tier automotive approved 3M adhesive. In-house world leading dielectric ceramic antenna technology inside allows for smaller size antennas without loss in efficiency. It delivers powerful 2x2 MIMO antenna technology for worldwide 4G LTE bands between 700 and 2600 MHz while allowing fallback to all common worldwide 3G and 2G frequency bands. 4G wireless applications demand high speed data uplink and downlink. High efficiency and high gain MIMO antennas are necessary to achieve the required signal to noise ratio and throughput required to solve these challenges. Taoglas also takes care to have high isolation between the two MIMO antennas to prevent self-interference. Low loss cables are used to keep efficiency high over long cable lengths.
@15/30
Description::The Storm MA412 LTE MIMO antenna is a low profile heavy-duty fully IP67 waterproof external antenna for use in worldwide mobile applications which require best in class 4G performance. It delivers powerful worldwide 4G LTE MIMO antenna technology while also covering legacy 3G bands.
- HD Video over LTE
- First Responder and Emergency Services
- Intelligent Transport Systems
- Internet of Things (IoT)
- High Definition video broadcast systems
- Wireless LTE MIMO M2M Devices
- Digital Signage
This antenna is extensively on vehicles as it's a great low-profile unit meaning vehicle height clearance isn't adversely affected. When mounted to a metal ground plane performance is excellent a great solution for vehicles using a 4G LTE modem. While technically providing some operation on 5G 3.5 GHz bands performance is highly dependent on ground plane design. Caution should be exercised with this antenna - radiation efficiency is considerably lower and may result in decreased performance in some applications.
@31/57
Description::The Taoglas MA963 Guardian is a next-generation 4x4 MIMO antenna. It is the world-first panel antenna designed for gateway and router devices with multiple wireless technologies. This antenna delivers powerful MIMO antenna technology for LTE and Sub-6 GHz 5G bands covering 600 MHz to 6 GHz. This antenna is designed for 4G and 5G bands worldwide (including 3G fallback). It is designed for access points terminals and routers. CAT-M1 and NB-IoT and the recently introduced 600 MHz Extended LTE Band 71 are also covered. This wide bandwidth enables designers to cover a wide range of technologies by installing a single antenna installation. It is a heavy-duty fully IP67 waterproof external M2M antenna available in both wall and adhesive mount versions.
5G wireless applications demand high-speed data uplink and downlink. High efficiency and high gain MIMO antennas are necessary to achieve the required signal to noise ratio and throughput required to solve these challenges. Taoglas also takes care to have high isolation among these antennas to prevent self-interference. Low loss cables used to keep efficiency high over long cable lengths. The MA963 comes with 3 metres low loss KSR200-P coaxial cables as standard.
@40/70
Description::
The OMB.915.B08F21 is a fiberglass omnidirectional outdoor antenna operating in the 915 MHz ISM bad. The antenna has an 8dBi high peak gain providing a large coverage area. Typical applications are in ISM WLAN RFID SigFox Lora and LPWA networks. The OMB.915.B08F21 Operated at 915MHz with an 8dBi peak gain. The omnidirectional antenna collinear dipole design means it radiates uniformly in the azimuth with a high gain providing coverage over long distances thus minimizing the number of cells or nodes needed in a network.
The UV resistant fiberglass housing enables the OMB antenna to be utilized in all kinds of harsh environments making it more robust and safer than traditional whip antennas. It has been designed to withstand high wind load. The integrated aluminum mounting bracket is perfect for directly mounting the antenna onto a pole or a wall. The connector is an industry-standard N-type female.
Barracuda OMB.915.B08F21 Key Features:
- Omnidirectional Radiation
- Collinear
- 8dBi Peak Gain
- Robust Design for all-weather operation
- IP65 Waterproof
- Length: 1.474m Weight: 870g
- Connector: N-type Female
- Wall/Pole Mount Bracket Included
@40/71
Description::The Apex III TG.45 is a 4G / 5G dipole antenna that has been designed to cover all cellular ISM and Wi-Fi working frequencies in the 600 to 6000 MHz spectrum along with B31 (450 MHz). Evolved from the already highly successful Apex II TG.35 the TG.45 has the highest wideband efficiency in its range of any terminal antenna on the market today. The extended lower frequency coverage at 450 MHz makes the TG.45 ideal for IoT applications such as remote monitoring of smart utilities.
- Swivelling hinged right angle termination with SMA Male connector
- Durable IP67 UV-resistant ABS housing
- Wideband covering all 4G and 5G bands from 698 to 6000 MHz
- Tuned to support Band 31 LTE 450 MHz
- Very high efficiency
- Patented technology
The Apex III has been primarily designed for use with 5G and 4G modules and devices that require the highest possible efficiency and peak gain to deliver best in class throughput on all major worldwide cellular bands for access points terminals and routers. High efficiency is vital for applications such as high speed video and real-time streaming or high capacity MIMO networks on public transportation. This attractive slim-line antenna is ground plane independent meaning it does not need to be connected to the ground-plane of a device to radiate efficiently. On the other hand neither is it seriously detuned by connecting to a ground-plane thus avoiding a problem notorious to smaller antennas. It comes with a SMA Male connector and swivel mechanism that allows the antenna to be rotated to fit in tight environments. The 90° hinge structure has been improved and strengthened so that the antenna in a 90° position would not drop down if used in environments prone to vibration.
@6/16
Description::
The Shockwave TLS.01.1F21 is a permanent mount waterproof external 4G 5G antenna operating across the full wideband 600 to 6000 MHz frequency range with an N type Female bulkhead connector. It has been designed to be used on a Ground Plane. This antenna has superior performance over wide-bands compared to traditional whip antennas. Up to 90% efficiency and with a minimum 2.3dBi peak gain over all cellular bands result when mounted on a 300 x 300 mm ground plane. Stable radiation patterns over low angles provides consistent gain in the horizontal plane meaning that it is especially suitable for cellular applications.
A unique indent tab on the base of the antenna allows a wrench to be used to solidly lock the antenna on top of its mounting location where an N type female connector juts out from a metal panel. Waterproof O-rings around the bottom base prevent water from leaking under the antenna. The TLS.01 antenna is IP67 waterproof and IP69K resistant against high pressure water jets in commercial cleaning environments which makes the antenna ideal for 5G / 4G / Cat-M / NB-IoT applications either in indoor or in harsh outdoor environments. This is an extremely efficient antenna on B28 (700 MHz) sporting 95.2% radiated efficiency. This antenna covers all 4G and 5G bands excluding LTE450 n79 4.5 GHz 5G FR2 mmWave. All data are recorded on a 300 x 300 mm metal ground plane.
@11/24
Description::The Taoglas Shockwave TLS.01.305111 is a permanent mount waterproof external 4G 5G wideband antenna operating across the full 600 to 6000 MHz range. The antenna has a 3 metre cable with an SMA male connector making it ideal for monitoring outdoor media and other IoT applications. It has been designed to be used on a Ground Plane. This antenna has superior performance over wide-bands compared to traditional whip antennas. Up to 77% efficiency and with a minimum 2.2 dBi peak gain over all cellular bands result when mounted on a 300 x 300 mm ground plane. Stable radiation patterns over low angles provides consistent gain in the horizontal plane making it especially suitable for cellular applications.
The TLS.01 antenna is IP67 waterproof and IP69K resistant against high pressure water jets in commercial cleaning environments. This makes the antenna ideal for 4G applications either in indoor or in harsh outdoor environments. While the antenna states operation up to 6000 MHz it should be clarified that radiated efficiency drops to below 9% above 5150 MHz. 5G 3.5 GHz. Performance is marginally impacted by the use of a 3 metre cable when contrasted to the N Bulkhead TLS.01 variant.
@17/34
The Telstra Prepaid 4GX Modem is a great way to connect to the internet on the go. It has a USB connection so you can plug it directly into your computer or laptop, with the connection able to be shared across 5 devices.
Features:
- It supports data transfer speeds of up to 600 Mbps.
- It can support up to 5 WiFi-enabled devices connected at a time.
- It uses USB connectivity so you can plug it directly into your laptop or computer.
- It's optimised for the Telstra 4G network.
- A 12 month warranty is included.
- It comes in a white design.
@32/58
It's a new breed of 4G that uses superior 700 MHz spectrum in 4GX areas. It can provide the fastest 4G speeds when using this device in Australia. Making everyday tasks faster and new things possible.
Features:
- Connects to 4GX – a new breed of speed that uses superior 700Mhz spectrum in 4GX areas.
- Connect up to 10 WI-FI compatible smartphones, tablets or laptops
- Battery life up to 10 hours.
- Indicator lights that let you know when you need to recharge and your connection status.
- Use as your own personal Wi-Fi hotspot that goes where you go.
- Easily recharge, check your balance, monitor your usage and more with our handy home page support.
Specifications:
- Dimensions: 104x 64.5x14mm
- Weight: 106g
- SIM Type: Full Size (2FF)
- Active Battery: Up to 10 hours
- Standby Time: Up to 200 hours
Supported Bands:
- 4G (CAT4) 700/1800/2600 MHz
- 3G 850/2100 MHz