Sort by:
Description::
2J 4G-5G Heavy-Duty Screw Mount Antenna delivers powerful worldwide connectivity and is compatible with 5GNR/4G LTE MIMO 3G and 2G bands (617-5925 MHz frequency range).
This antenna facilitates communications in MIMO or separate protocols configuration allowing devices to remain online while moving through different coverage areas. The easy-to-install heavy-duty design and SMA Male high performance antenna integrates durability and efficiency into a permanent solution.
FEATURES:
- 4-in-1 Combination Antenna
- Ultra Wideband Antenna
- 617-5925 MHz Sub-6 GHz Bands
- Full 4G LTE backward compatibility
- Ground Plane Independent
- 4.8 dBi 5G NR Peak Gain
- Heavy Duty Antenna
- Anti-Rotation Mounting
- Customisable cable and connector
2J 4G-5cG Heavy-Duty Screw Mount Antenna with GPS/GNSS (2J7B83Bc)
The 2J 4G-5G Heavy-Duty Screw Mount Antenna with GPS/GNSS is protected with a robust and heavy-duty housing made with high-quality acrylonitrile styrene acrylate (ASA) UV stable material known for its thermal resistant properties and a plastic antenna base as an alternative low-cost solution to the metal base option. Ground plane independence and screw mount technology allow for solidly locking the antenna on top of its mounting location making its installation easy and reliable. Cables and connectors can be customized to specific requirements. The IP67 and IP69 ingress ratings provide this compact antenna with maximum protection against dust and water penetration while the IK09 rating adds an extra level of anti-vandal security with high impact resistance. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
@12/26
Description::
The 2J 4G-5G WiFi Ultraband 2x2 MIMO Adhesive Antenna is a great solution to be well prepared for future technology worldwide such as NR (New Radio) and offers a reliable signal quality while taking advantage of the MIMO option. The low-profile compact design and high-quality adhesive mount make this antenna an ideal solution for outdoor applications with quick and easy installation on a wide range of surfaces.
FEATURES:
- 2-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 6.3 dBi 5G NR Peak Gain
- High Performance
- Low Profile
- Customizable Cable and Connector
2J 4G-5G WiFi Ultraband 2x2 MIMO Adhesive Antenna (2J6983Pa)
The 2J6983Pa housing is IP67 and IP69 certified and manufactured from black or white ABS / UV stable material offering exceptional durability at a low cost for maximum protection from extreme outdoor applications. It comes with standard SMA-Male connector and 300 cm long D302 Coaxial cable a popular choice for automotive applications due to its environmental properties. With a compact design (89 × 76 × 30 mm) ground plane independence and high-grade adhesive mounting allow for easy installation on metal or non-metal surfaces. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
@7/17

2J 4G-5G WiFi Ultraband 2x2 MIMO Lightweight Stud Antenna 617 to 5925 MHz
2J 4G-5G WiFi Ultraband 2x2 MIMO Lightweight Stud Antenna 617 to 5925 MHz
Description::
The 2J 4G-5G WiFi Ultraband 2x2 MIMO Lightweight Stud Antenna offers 2 high-performance antennas that support 5GNR 4G LTE FirstNet CBRS LPWA CAT-X CAT-Mx CAT-NBx NB-IoT 3G 2G standards making it the most reliable antenna on the market.
FEATURES:
- 2-in-1 Combination Antenna
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 4.9 dBi 5G NR Peak Gain
- High Performance
- Heavy Duty Antenna
- Lightweight Plastic Base
- Anti-Rotation Mounting
- Customizable Cable and Connector
2J 4G-5G WiFi Ultraband 2x2 MIMO Lightweight Stud Antenna 2J7B83Ba
The 2J 4G-5G WiFi Ultraband 2x2 MIMO Lightweight Stud Antenna is protected with a robust and heavy-duty housing made with high-quality acrylonitrile styrene acrylate (ASA) UV stable material known for its thermal resistant properties and ASA plastic antenna base as an alternative low-cost solution to the metal base options. This antenna is impact resistant dust resistant and waterproof with full IP67 IP69 and IK09 certification making it ideal for external applications in harsh environmental conditions. Ground plane independence and reliable screw mount installation offer easy permanent installations on a wide range of surfaces. 2J Antennas supports the health of our environment and manufactures all our products without hazardous materials making us fully REACH and RoHS compliant.
@9/21
Description::
This antenna combines wideband multi-application device functionality that caters to 5GNR 4GLTE 3G 2G and CDMA technologies operating within 617 MHz to 5925 MHz frequencies. The 2J4983P is a solution with easy installation through the simple peel-and-stick application making this antenna ideal for commercial industrial and consumer industries.
2J4983P 5G NR Low Profile Adhesive Mount Antenna Feautres:
- Ultra-wideband antenna
- Sub 6GHz Bands 617-5925 MHz
- Full 4G LTE backwards capability
- Ground plane independent
- 3.5 dBi 5G NR peak gain
- High performance
- Low profile
- Customisable cable and connector
The 2J4983P brings exceptional signal strength and quality in a 360-degree radiation pattern due to its omni-directional design while maintaining high peak gains and efficiencies. This antenna is designed with CAT-M technology taking LTE into the next generation of IoT applications making it fully compatible with existing LTE networks and reducing implementation costs for carriers via backward compatibility. In addition this antenna is a great solution to prepare for worldwide future technology such as NR (New Radio). 2J4983P offers NB-IoT (CAT-M2) designed to send data directly to primary servers eliminating the need for a gateway and keeping implementation costs low.
Suggested applications include:
- Automotive
- Industrial and Consumer IoT
- Telemetry
- Telematics
- Commercial and Home Automation
- HD Video High-Speed Streaming
- High Volume MIMO Networks
With overall dimensions of only 150.5 x 42 x 15.3 mm high-quality adhesive tape and ASA UV stable housing the 2J4983P can be installed on any surfaces found in the most extreme outdoor environments without any risk of failure. The 2J4983P features a standard SMA-Male connector and a 300 cm long LL195 cable. As an added measure this antenna was designed with ground plane independence in order to eliminate any grounding restrictions during the installation process.
5GNR Antenna Bands list | ||||
---|---|---|---|---|
Parameters | 5GNR Antenna | |||
Frequency (MHz) | 617-960 | 1427-2690 | 3300-5000 | 5150-5925 |
Band (MHz) | 600 700 850 900 | 1500 1600 1700 1800 1900 2000 2100 2300 2500 2600 |
3300 3500 3600 3700 4500 | 5200 5500 5800 |
5GNR Bands | n5 n8 12 n20 n28 n71 n81 n82 n83 |
n1 n2 n3 n7 n25 n34 n38 n39 n40 n41 n50 n51 n66 n70 n74 n75 n76 n80 n84 n86 |
n77 n78 n79 | |
4GLTE Bands | B5 B6 B8 B12 B13 B14 B17 B18 B19 B20 B26 B27 B28 B29 B44 B67 B68 B71 B85 |
B1 B2 B3 B4 B7 B9 B10 B11 B21 B23 B24 B25 B30 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B45 B50 B51 B65 B66 B69 B70 B74 B75 B76 |
B22 B42 B43 B48 B49 B52 |
B46 B47 B252 B255 |
3GCELL Bands | B5 B6 B8 B12 B13 B14 B19 B20 B26 |
B1 B2 B3 B4 B7 B9 B10 B11 B21 B25 B32 B33 B34 B35 B36 B37 B38 B39 B40 |
B22 | |
2GCELL Bands | 710 750 810T 850 900P 900E 900R |
1800DCS 1900PCS | ||
CDMACELL Bands | BC0 BC2 BC3 BC7 BC9 BC10 BC12 BC18 BC19 |
BC1 BC4 BC6 BC8 BC13 BC14 BC15 BC16 BC20 BC21 |
Specification:
5GNR/4GLTE/FirstNet/CBRS/LPWA/3G/2G | |
---|---|
Technologies | 5G 4G 3G and 2G |
Standards | 5GNR/4GLTE/FirstNet/CBRS/LPWA/CAT-X/CAT-Mx/CAT-NBx/NB-IoT/3G/2G |
Frequency (MHz) | 617-960 1427-2690 3300-5000 5150-5925 |
Return Loss (dB) | ~-8.2 ~-12.3 ~-8.6 ~-7.6 |
VSWR | ~2.8:1 ~1.8:1 ~2.3:1 ~2.8:1 |
Efficiency (%) | ~55.9 ~60.4 ~45.8 ~25.8 |
Peak Gain (dBi) | ~2.2 ~3.5 ~3.0 ~0.5 |
Impedance (Ohm) | 50 |
Polarisation | Linear |
Radiation Pattern | Omni-Directional |
Max. Input Power (W) | 25 |
@4/12
Description::
This versatile antenna combines high performance with full bandwidth coverage for 5G NR 4G LTE and 3G/2G/CDMA cellular spectrums and the smallest antenna design on the market. The innovative hinged swivel design allows the antenna to be positioned in a straight right or 45-degree angle so it can be rotated into the direction with the most signal strength and reduce interference with other antennas nearby.
Features:
- Dipole antenna
- Ground plane independent
- Ultra-Wideband antenna: 619-5925MHz
- Sub 6GHz Bands
- Full 4GLTE backward compatibility
- 1.6 dBi 5G NR peak gain
- High performance
- Hinged Connector
Suggested Applications:
- Terminals Base Stations and Routers
- High Traffic MIMO Device Connectivity
- Industrial Commercial and Residential IoT
- Industrial Commercial and Residential Smart Home / Office
- ATM Machines
- IoT Dispensers
- Vending Machines
- Electrical Metering
The antenna housing is manufactured from a PC/ABS UV protective material allowing it to withstand extreme temperatures ranging between -40C to +85C and making it ideal for outdoor applications. The design dimensions are 135 x 19 x 10 mm (straight angle) 110 x 42 x 10 mm (right angle) and 88 x 112 x 10 mm (45-degree angle). This antenna is ground plane independent allowing for a wide range of installation options with minimal restrictions.
Specification:
5GNR/4GLTE/FirstNet/CBRS/LPWA/3G/2G | |
---|---|
Technologies | 5G 4G 3G and 2G |
Standards | 5GNR/4GLTE/FirstNet/CBRS/LPWA/CAT-X/CAT-Mx/CAT-NBx/NB-IoT/3G/2G |
Frequency | 617-960 MHz 1427-2690 MHz 3300-5000 MHz 5150-5925 MHz |
Return Loss (dB) | ~-11.2 ~-10.7 ~-11.4 ~-8.8 |
VSWR | ~2.0:1 ~2.6:1 ~2.3:1 ~2.2:1 |
Efficiency (%) | ~37.6 ~43.3 ~35.1 ~41.9 |
Peak Gain (dBi) | ~-1.1 ~0.5 ~0.3 ~1.6 |
Impedance (Ohm) | 50 |
Polarisation | Linear |
Radiation Pattern | Omni-Directional |
Max. Input Power (W) | 25 |
@3/10

2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna
2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna
Description::
The 2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna offers a ground plane dependent internal antenna designed with a compact form factor ideal for space-restricted device integration. This antenna is manufactured out of high-grade fiberglass a material known for durability and resistance to extreme temperatures ranging between -40C and +85C. Proper antenna placement is fundamental for optimal performance and ideal for extremely small PCB application requirements by taking up minimal space without compromising performance.
FEATURES:
- Ultra Wide band Antenna
- SMT Brick Embedded Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Dependent
- 3.1 dBi 5G NR Peak Gain
- High Performance
- Fiberglass Material
- Compact Size
- Easy to Integrate
2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna 2JE71
The 2J Brick 5GNR/4GLTE/3G/2G High-Performance Mini Embedded Surface Mount Antenna is designed with omni-directional coverage and is optimized for 360-degree signal strength while maintaining stable gains and efficiency across all bands. The new 5GNR technology enhances mobile broadband and ultra-reliable low-latency communications. Edge and EV-DO are designed for digital mobile phone technology and wireless internet access improving data transmission while maintaining higher bit rates and advanced multiplexing techniques resulting in increased capacity and maximum throughput.
Specification:
connection 1
5GNR/4GLTE/FirstNet/CBRS/LPWA/3G/2G
Technologies | 5G 4G 3G and 2G |
---|---|
Standards | 5GNR/4GLTE/FirstNet/CBRS/LPWA/CAT-X/CAT-Mx/CAT-NBx/NB-IoT/3G/2G |
Frequency | 617-960 1427-2690 3300-5000 5150-5925 |
Efficiency (%) | ~55.2 ~61.4 ~60.4 ~40.0 |
Polarisation | Linear |
Radiation Pattern | Omni-Directional |
Return Loss (dB) | ~-6.7 ~-10.3 ~-10.2 ~-5.7 |
VSWR | ~3.1:1 ~2.0:1 ~2.0:1 ~3.5:1 |
Peak Gain (dBi) | ~0.5 ~2.7 ~3.1 ~2.2 |
Impedance (Ohm) | 50 |
Max. Input Power (W) | 25 |
@2/10
Description::
This versatile antenna combines high performance with full bandwidth coverage for 5G NR 4G LTE and 3G/2G/CDMA cellular spectrums and the smallest antenna design on the market. The innovative hinged swivel design allows the antenna to be positioned in a straight right or 45-degree angle so it can be rotated into the direction with the most signal strength and reduce interference with other antennas nearby.
FEATURES:
- Dipole antenna
- Ground plane independent
- Ultra-Wideband antenna:
- 617-3800 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- 0.6 dBi 5G NR peak gain
- High performance
- Waterproof antenna
2J Dagger 4G-5G Weatherproof Terminal Antenna 2JW1483
The slim design (192 x 20 x 18 mm) SMA-Male connector and dipole topology allow for easy direct installation to any NEMA rated plastic or metal enclosures. Manufactured with PC/ ABS UV stable materials this antenna is the most durable on the market with full IP67 and IP69 certification. The 2JW1483 is ground plane independent eliminating any grounding restrictions during the installation process. The health of the environment is important to 2J Antennas; therefore all our products are manufactured without hazardous materials making us fully REACH and RoHS compliant.
@4/12
Description::
The 2J5083P brings exceptional signal strength and quality in a 360-degree radiation pattern due to its omni-directional design while maintaining high peak gains and efficiencies. This antenna is designed with CAT-M technology taking LTE into the next generation of IoT applications making it fully compatible with existing LTE networks and reducing implementation costs for carriers via backward-compatibility.
In addition this antenna is a great solution to prepare for worldwide future technology such as NR (New Radio). 2J5083P offers NB-IoT (CAT-M2) designed to send data directly to primary servers eliminating the need for a gateway and keeping implementation costs low.
FEATURES:
- Ultra Wide band Antenna
- 617-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 3.6 dBi 5G NR Peak Gain
- Low Profile
- Customizable Cable and Connector
2J I-Bar 4G-5G WiFi Ultraband Adhesive Antenna (2J5083P)
With overall dimensions of only 116 x 22 x 6.7 mm high-quality adhesive tape and PC/ABS UV stable housing the 2J5083P can be installed on any glass or ABS surfaces found in the most extreme outdoor environments without any risk of failure. The 2J5083P features a standard SMA-Male connector and a 300 cm long LL100 cable.
As an added measure this antenna was designed with ground plane independence in order to eliminate any grounding restrictions during the installation process. The health of the environment is important to 2J Antennas; therefore all our products are manufactured without hazardous materials making us fully REACH and RoHS compliant.
@3/10

2J Machete UHF 4G-5G WiFi X-Ultraband Hinged Antenna 410 to 5925 MHz SMA Male
2J Machete UHF 4G-5G WiFi X-Ultraband Hinged Antenna 410 to 5925 MHz SMA Male
Description::
Versatile Antenna for Comprehensive Bandwidth Coverage
This high-performance antenna offers full bandwidth coverage for 5G New Radio UHF 4G LTE and 3G/2G/CDMA cellular spectrums (617-5925 MHz). Its innovative hinged swivel design allows flexible positioning at straight right or 45-degree angles ensuring optimal signal strength and minimising interference with nearby antennas. Available in black or white it is perfect for both indoor and outdoor applications.
Key Features
- Dipole Antenna: Provides reliable and stable performance across various frequencies.
- Ground Plane Independent: Offers flexible installation options without the need for a ground plane.
- Ultra-Wide Band Coverage: Covers a wide frequency range from 410-5925 MHz including sub-6GHz bands.
- Full 4G LTE Backward Compatibility: Ensures seamless operation with existing 4G networks.
- 2.5 dBi 5G NR Peak Gain: Delivers high-performance signal strength for 5G networks.
- Hinged Connector: Allows adjustable positioning for optimal signal direction.
- Durable Housing: Made from PC/ABS UV stable material it withstands extreme temperatures (-40°C to +85°C).
- Environmental Compliance: Manufactured without hazardous materials fully REACH and RoHS compliant.
Ideal for various applications this antenna provides robust performance with flexible installation options ensuring reliable connectivity across multiple spectrum bands.
@3/11
Description::
The 2J Mini-Shaker 4G Stud Mount Antenna (2J7624B) is designed to fit a wide range of installation requirements while keeping cost-effectiveness and reliable connectivity in mind. Designed with a low-profile housing this antenna is ideal for high quality data and voice throughput for mobile NB-IoT LPWA CAT-X/M and FirstNet applications that operate within 698 MHz to 2700 MHz frequencies.
FEATURES:
- Ground Plane Independent
- Wide Band Antenna
- 698-2700 MHz 4GLTE Bands
- 3.2 dBi 4G LTE Peak Gain
- Customizable Cable and Connector
2J Mini-Shaker 4G Stud Mount Antenna (2J7624B)
The 2J Mini-Shaker 4G Stud Mount Antenna is fully IP67 and IP69 rated with protection against ingress of moisture water dust and high temperatures (-40C - +85C) without any compromise to antenna operations. The antenna housing is manufactured with commercial grade ASA material with a Zamak antenna base and double-sided foam gasket for extra protection. With compact measurements of Ø 50 x 50.8 mm make this ground plane independent antenna ideal for indoor or outdoor installations without restrictions. This antenna is tuned with a single 300 cm long DACAR100 cable that feeds through the anti-rotation screw mount and an SMA-Male end connection.
@3/11

2J UHF 4G-5G WiFi X-Ultraband Embedded Adheisve Antenna 410 to 5925 MHz
2J UHF 4G-5G WiFi X-Ultraband Embedded Adheisve Antenna 410 to 5925 MHz
Description::
The 2J UHF 4G-5G WiFi X-Ultraband Embedded Adhesive Antenna is optimized for full-range signal strength and exceptional signal quality within 410MHz - 5925MHz frequencies. This compact antenna offers superior data transmission at low latencies higher bit rate and advanced multiplexing techniques that result in maximum throughput while maintaining stable peak gains and efficiency across all bands.
FEATURES:
- Ultra Wide band Antenna
- Rigid Internal Antenna
- 410-5925 MHz Sub 6GHz Bands
- Full 4GLTE backward compatibility
- Ground Plane Independent
- 4.2 dBi 5G NR Peak Gain
- High Performance
- Fiberglass Material
- Self-Adhesive
- Customizable Cable and Connector
2J UHF 4G-5G WiFi X-Ultraband Embedded Adhesive Antenna (2JP1180P)
The 2JP1180P comes with a standard U.FL connector and 1.37mm Mini-Coax cable measuring 180mm in length. 2J Antennas supports the health of our environment and production staff by manufacturing all our products without hazardous materials while maintaining full REACH and RoHS compliance.
@3/11
Description::
Enhance your 4G LTE connectivity with the Wes 4G Magnetic Base Antenna designed for optimal signal strength across a wide frequency range
The Wes 4G Magnetic Base Antenna is a high-performance antenna designed to enhance signal strength for 4G LTE networks. Covering a wide frequency range from 698 MHz to 2700 MHz it ensures reliable connectivity across multiple bands. Its omni-directional design captures signals from all directions making it ideal for use in areas with varying signal strengths. The antenna features a durable magnetic base allowing for easy and secure mounting on metal surfaces such as vehicles and equipment without the need for permanent installation.
Key Features
- Wide Frequency Range: Operates from 698 MHz to 2700 MHz supporting various 4G LTE bands.
- FME Female Connector: Ensures compatibility with a range of devices and cables.
- Gain: 7dB for enhanced signal strength and improved connectivity.
- Omni-directional Design: Captures signals from all directions for consistent performance.
- Magnetic Base: Provides easy and secure attachment to metal surfaces enabling flexible placement.
- Durable Construction: Built to withstand harsh environments suitable for both indoor and outdoor use.
- Versatile Applications: Ideal for enhancing signal strength in vehicles remote locations and areas with weak signal reception.
This antenna is a practical solution for improving cellular connectivity ensuring better signal quality and more reliable communication.
@7/18
*2 per customer limit apply
It doesn't matter if you're at home, in the car, or just out and about, take the Optus 4G Plus network with you. Connect up to 10 WiFi enabled devices at the same time, plus one connection via USB cable with the handy Optus E5573 4G WiFi modem. You can connect your tablet, laptop, mobile phone or gaming device with a press of a button, and multi-task with ease.
This modem1 features:
- 50GB of included data^ within 28 days expiry for use within Australia
- 4G/4G Plus connection gives you internet on the move
- Connect up to 10 WiFi enabled devices at the same time
- Light and thin elegant design with LED indicators
Feature
- includes 50GB of data over 28 days until 31/03/2021
- connect up to 10 devices
- upto 6 hours work time
- 1 touch button for easy use
ALL FOR USE IN AUSTRALIA.
Fair Go Policy applies.
SPECS of Modem E5573
Dimensions (L X W X H)
96.8 x 58 x 13.5 mm
Weight
About 80g (including the battery)
Color
Matte White
Internal Memory:
Internal Memory + Accessible Space
1Gbits NAND Flash
Expandable Memory:
External Memory (including max capacity)
MicroSD up to 128GB
Connectivity:
WiFi Bands: 802.11 b/g/n
SIM Card compatibility
Standard
Bands:
3G Network Bands (in MHz)
DC-HSPA+/HSPA+/HSPA/UMTS: Band1(2100MHz)/Band5(850MHz)/Band8(900MHz)
4G Network Bands (Band & MHz)
LTE FDD: B1(2100MHz)/B3(1800MHz)/ B7(2600MHz)/B8(900MHz)/B20(800MHz)/B28(700MHz)
LTE TDD: B38(TDD 2600MHz)/B40(TDD 2400MHz)/B41(TDD 2500MHz)
WHAT'S IN THE BOX
- Optus Huawei E5573 4G WiFi modem
- Optus $30 Prepaid Mobile Broadband SIM Starter Pack
- Rechargeable battery
- USB cable
- Quick start guide
- Safety information
Features
● High speed data transfer.
● Both port charging and data transferring optional, plug more freely.
● 1.5M long data transfer and charger cable for lightning interface devices.
● Connect phones to the computer's USB port for efficient syncing and charging simultaneously.
● Connect to the USB power adapter for convenient charging from a wall outlet.
● High quality durable and abrasion resistant cable.
● Reliable to transfer data, charge your device, and synchronize your PC.
● Upgraded version of flat ruggedized synchronization data charger cable.
● Noodle style cable helps avoid tangled cords.
● Compatible with IOS 9 system, universal for Apple phones and tablet PCs.
● High nickled interface, strong antioxidant capacity, charge fast.
SPECS
General
Type
- Cable
Material (Cable & Adapter)
- TPE
Color
- White
Interface Type
- 8 pin
Cable Length(cm)
- 1.5m
Package Size (LxWxH)
- 16.50 x 6.50 x 2.00 cm / 6.50 x 2.56 x 0.79 inches
Package Contents
- 1 x Baseus 1.5m String Series Data Cable
BOOST↑CHARGE™ USB-C™ Cable with Lightning Connector + Strap (made with DuraTek™)
SPEED, STYLE, AND STRENGTH
Plug in and power up your iPhone. This elegantly designed cable is compatible with USB Power Delivery, making it an ideal companion for your fast charging USB-PD chargers. Made with DuraTek, it is 10X stronger than standard cables.* Start charging and syncing in style with this 4-foot/1.2m cable. *Based on internal bend cycle test when compared to standard cables. (Belkin F8J144) THE BELKIN DIFFERENCE
SUPPORTS USB POWER DELIVERY FAST CHARGING
Take advantage of the Fast Charge feature on your iPhone 8 or later—charging up to 50% in 30 minutes when paired with an 18W or higher USB-C power adapter.** **Charge time varies with environmental factors; actual results will vary. 10X STRONGER WITH DURATEK
Strengthened inside and out, DuraTek cables last 10x longer than standard cables. Laser-welded connectors resist breakage while Aramid fibers and a tightly woven jacket come together for a supremely-durable cable. MADE FOR iPhone
MFi certification means that an electronic accessory has been designed specifically for iPhone and is certified by the developer to meet Apple specifications. This means you can count on a reliable connection, every time. Compatibility: SKU:F8J243BT04-WHT Source from Belkin official website
Description:
Charge and sync music, photos, or data on your USB-C devices from any USB-A port with this reliable cable you can use at home, work, or on the road. It is also USB-IF certified and comes in both black and white.
Compatibility:
- Apple iPhone 5S
- Apple iPhone 5C
- Apple Watch 40mm Series SE
- Apple Watch 38mm
- Apple Watch 42mm Series 2
- Apple iPod Touch 6th generation
- Apple iPhone 6S
- Apple iPhone 8
- Apple Macbook Pro 13"
- Apple iPhone 5
- Apple iPad 9.7 (2017)
- Apple iPad Air 10.9 4th Gen (2020)
- Apple Macbook Pro 15"
- Apple iPad Air 2
- Apple New iPad Pro 11
- Apple iPad Pro 11 (2018)
- Apple iPhone 7 Plus
- Apple AirPod Pro
- Apple iPad Mini with Retina Display
- Apple iPad 10.2 8th Gen (2020)
- Apple iPad Air
- Apple iPhone XR
- Apple Watch 40mm Series 5
- Apple iPhone 12
- Apple iPhone 12 Pro
- Apple Watch 42mm Series 3
- Apple iPhone 12 mini
- Apple iPhone 11
- Apple iPhone XS
- Apple iPad Mini 4
- Apple New iPad Pro 12.9
- Apple iPhone XS Max
- Apple iPad Pro 9.7 (2017)
- Apple iPhone 11 Pro Max
- Apple Macbook Air 13"
- Apple iPad Pro 10.5 (2017)
- Apple iPhone 6
- Apple iPhone SE 2016
- Apple Watch 40mm Series 6
- Apple iPhone 7
- Apple iPhone X
- Apple Macbook Pro 13" with Retina Display
- Apple iPhone 8 Plus
- Apple Watch 42mm 1st Gen
- Apple iPhone 6 Plus
- Apple iPad 4th Generation
- Apple Watch 44mm Series SE
- Apple Watch 44mm Series 6
- Apple iPad Pro 12.9 (2018)
- Apple Watch 44mm Series 4
- Apple iPhone SE
- Apple MacBook
- Apple Watch 42mm Series 4
- Apple iPad Pro 12.9 (2017)
- Apple Watch 44mm Series 5
- Apple iPhone 12 Pro Max
- Apple iPod Touch 5th generation
- Apple iPad Mini 5
- Apple iPad 10.2 7th Gen (2019)
- Apple iPhone 6S Plus
- Apple iPhone 11 Pro
- Apple Watch 40mm Series 4
- Apple Air Pod 2019
- Apple iPad 9.7 (2018)
- Apple iPad Mini 3
SKU:CAB001BT3MBK
Features:
Power up with this Belkin BoostCharge USB-C to USB-C Cable. Featuring a durable, PVC design and tested to withstand over 25,000 bends, this USB-IF certified cable is perfect for charging, syncing and connecting your USB-C enabled devices. Its 1 m length makes it a great option for taking with you on-the-go.
- It can be used to charge, sync and connect your USB-C enabled devices.
- It has male USB-C to male USB-C connectors.
- It supports transfer speeds up to 480 Mbps.
- It measures 1 m in length.
- It boasts up to 60 W charging for a variety of devices.
- Its durable, PVC exterior has been tested to survive over 25,000 bends.
- It comes in white to complement your existing accessories.
General
-
- Cable Length (m)
- 1 m
-
- Barcode
- 745883788248
-
- Descriptive Colour
- White
-
- Input/Output Cable Type
- USB-C
-
- Maximum data transfer rate (Mbps)
- 480 Mbps
-
- MFi certified
- No
-
- Total Number of Items in Set
- 1
-
- USB version
- USB 2.0
- USB version
Connections
-
- Left Connector Gender
- Male
-
- Left Connector Type
- USB-C
-
- Right Connector Gender
- Male
-
- Right Connector Type
- USB-C
Connectivity
-
- Connector Type
- USB-C
SKU:CAB003BT1MWH